Topbar Banner Topbar Banner Topbar Banner

Htech 250LPH RO PURIFIER

(0 Reviews)
Estimate Shipping Time: 7 days
Brand
H-TECH

Inhouse product


Price
KSH290,000.00 /1
Quantity
(10 available)
Total Price
Buy Now
Share
Top Selling Products

Reviews & Ratings

0.00 out of 5.0
(0 Reviews)
There have been no reviews for this product yet.




HTECH 250 LPH  RO Plant


HTECH 250 LPH RO Plant model is starting RO range in commercial RO plant segment with universal industry standard size of 4040 membrane.  


It has single "4040" RO Membrane that gives a fantastic long lasting performance to the client requirement. 


It has flow rate of 250 liter per hour with the duty cycle of 2000 ltr per day. 


HTECH RO PURIFIER  has high demand in Schools, Hospitals, Industries, corporate offices etc. 


The running cost of maintenance is also low as compared to 100 lph RO Plant. The below information shows the design and specification of 250 LPH RO Plant . 



Design  Basis of R O System  



  1. Plant Capacity :

The Reverse Osmosis Plant has been designed to produce the desired output of 250 Liters per Hour.  



  1. Raw Water analysis :

The Reverse Osmosis System is designed on following raw water analysis as indicated below ;

Parameter

Results

Raw water source

Bore Well

pH

Not Known

TDS

Upto 2500 Mg/L





 

  1. Plant Design Basis and Conditions :
  • We have designed this system to produce permeate flow 250 Liters per hour.
  • The treated water quality as required i.e pH 7-8 after correction ,TDS <100 PPM & Hardness < 50 PPM can be achieve , subject to the feed water quality is the same as specified above .In case of any change in the quality of raw water it may have implication on operating parameters or on end results of the system.
  • The system of recovery is properly maintained corresponding to the raw water TDS.
  • RO feed water limiting conditions as mentioned below are strictly maintained,

 

Parameter

Results

Turbidity

< 1 NTU

Free Chloride

Nil

Oil & Grease

Nil

Iron

<0.1 PPM

SDI

<4.0

Temperature

< 45 degree C

    SCOPE OF SUPPLY  

S.No

Description

Qty

Remaks

1

Raw Water Pump

1 No

Capacity 1 m3

2

Sand  Filter

1 No

H 1200 MM & Dia 250 MM Flow Rate 1500 Liter per hour

3

Carbon Filter

1 No

H 1200 MM & Dia 250 MM Flow Rate 1500 Liter per hour

4

Anti-scalent Dosing System

1 Set

Capacity 0-06 LPH

5

Micon Filter Hsg 20” Big Blue

2 Nos

20” Big Blue with 4” Dia

6

Micron Filter

2 Nos

20” * 2” Dia

7

High Pressure Pump

1 No

Capacity 1 M3

8

Membrane

1 No

Size 4” * 40”

9

Membrane Hsg

1 No

1 Elements in Hsg

10

C I P System

1 Set

Optional at extra cost

11

Electric Control Panel

1 Set


12

Flow Meters

2 Nos


13

Pressure Switches

2 Nos

Low & High Pressure

14

Pressure Gauges

2 Nos


15

Pipe Fittings

1 Lot

Upvc  all over

16

R O Skit

1 No

MS fabricated with epoxy paint or SS 202

17

Online Conductivity Meter

1 No

For Measuring On line Conductivity Optional at extra cost

 


                 TECHNICAL SPECIFICATIONS     Flow Rate   Treated Water :           


250 LPH  based on TDS level upto 2500 PPM    

  • Raw Water Pump

  Specifications

  • Horizontal Centrifugal
  • Power Required : 0.5 HP
  • Make : ddg.
  • Quantity : 1 No

 

  • MEDIA FILTER

Specifications

  • Make : Pentair / Aventura
  • Material of Construction : FRP
  • Dia & Length : 10*54
  • Testing Pressure :6 Kg/cm2
  • Opening : Top
  • Quantity : 1 No
  • Valve : Multiport Type Lever Type
  • Size : ¾ Inch
  • Maximum Flow : 2000 LPH
  • Media : Gravel, Pebbles ,Quartz Sand ,Anthracite etc.
  • CARBON FILTER



Specifications

  • Make : Pentair / Aventura
  • Material of Construction : FRP 10*54
  • Testing Pressure :6 Kg/cm2
  • Opening : Top
  • Quantity : 1 No
  • Valve : Multiport type, Lever tpye
  • Size : ¾ Inch
  • Maximum Flow : 2000 LPH
  • Carbon : Acid wash with 1100 + ID valve
  • MICRON FILTER



Specifications                 Cartridge Filter & Housing   Big Blue Housing :

  • Make : Imported in PP
  • Length & Diameter : 20”*4”
  • Quantity : 2 Nos



  Cartridge :

  • Make Ametek USA in PP
  • Length : 20”
  • Micron Rating : 05 Micron
  • Quantity : 2 Nos
  • DOSING SYSTEM

Specifications

  • MOC: PP
  • Capacity : 06 LPH
  • Pressure : 10 psig
  • Qty : 1 No


Ø  Make : E Doze

 

  • HIGH PRESSURE PUMP

Specifications

  • MOC : Stainless Steel
  • Type : Vertical
  • Flow Rate : 1 M3
  • Power Required : 1 Phase ,1.1 Kw
  • Make : Sumo/CRI/Nangfang
  • RO MEMBRANE



Specifications

  • Type : Spiral Wounded
  • & Length : 40*40
  • No membrane : 1 No
  • Recovery : Approx 30 %
  • Make of membrane : Dow/ Hydranautics
  • Salt rejection : 95-98 %
  • RO PRESSURE TUBE


Specifications

  • MOC : FRP Composite
  • Pressure Vessels : 1 No
  • No of membrane per vessel : 1 No
  • Make : Water Life.






  C I P SYSTEM ( Optional at Extra cost )


Specification

  • With R W Pump & FRP Tank : 1 No , 100 Liter

 

  • ELECTRICAL PANAL



Specifications

  • Complete starters, overload relays , single phase prevention for pump.
  • Voltmeter , Ammeter , MCB’s , indicating lights
  • Push buttons
  • Rocker Switches for Dozers
  • Incomers, Auto- Manual Switches




   INSTRUMENTATION

Specifications

  • Rota Meter : 2 nos (permeate & Reject line )
  • Make : Flowstar , Vats
  • Digital TDS/ Conductivity Meter 1 no at extra cost
  • Make : Vats India
  • Pressure Switch : 2 Nos
  • Make : Indfoss/Denfoss
  • Pressure Gauges : 2 Nos
  • Make : Gluck/ Guru


 

PLUMBING & FITTING

 

  • Pipelines upvc
  • NRV’s pressure relief valves , where needed .
  • The system with be on common MS base frame or  SS as per Direction of Client.

       

Related products

Product Queries (0)

Login or Registerto submit your questions to seller

Other Questions

No none asked to seller yet

Top Selling Products
All Categories
Flash Sale
Todays Deal