How to Reduce Your Electricity Bill in Kenya (2026): 15 Practical Ways

Tokens finishing too fast? Most of a home bill comes from a few appliances. Target those first.

Where the Units Go

15 Ways to Save

1. Replace all bulbs with LED.
2. Take shorter showers.
3. Boil only the water you need.
4. Iron once a week.
5. Defrost and clean the fridge coils.
6. Keep the fridge away from the cooker and sun.
7. Switch off standby devices at the socket.
8. Use natural light by day.
9. Use outdoor security lights with timers or sensors.
10. Check the meter with everything off: if it still counts, call an electrician.
11. Wash full loads only.
12. Cook with lids on.
13. Unplug chargers when done.
14. Fix dripping hot taps.
15. Consider solar backup for lights and electronics.

LED Bulbs

Some photos are reference images of the product type, used under open licences. Image credits are on each product page.

Solar Backup

Sizing help: solar panel price guide and solar backup systems.

Worked Example: Finding the Big User

A household spending more on tokens every month reads the meter before and after one day of normal use, then repeats it with the geyser switched off. The difference shows the geyser alone uses close to half the units. Switching it on for one hour before showers, and fitting LED bulbs throughout, brings the monthly spend down noticeably.

How to Read Your Token Meter

Write down the units remaining at the same time each day for a week. Units used per day × your tariff gives your daily cost. Change one habit at a time and compare the numbers to see what really saves.

Common Mistakes to Avoid

• Blaming the token rate before checking usage.
• Keeping a geyser on all day.
• Ignoring a meter that counts with everything off (possible leakage).
• Buying cheap bulbs that fail quickly.

Not sure which one fits? Send us your details on WhatsApp or through the product page and we will help you choose.

Frequently Asked Questions

Why are my KPLC tokens finishing so fast?

Usually water heating, ironing, an old fridge or a wiring fault; check the biggest users first.

Which appliance uses the most electricity at home?

Water heaters and instant showers, followed by irons, kettles and cookers.

Do LED bulbs really save money?

Yes, they use a fraction of the power of old bulbs.

Does unplugging appliances save power?

Standby use is small per device but adds up across many devices.

Is solar worth it in Kenya?

For lights, electronics and backup it often is; heavy heating loads need a bigger system.

How do I check for electricity leakage?

Switch everything off; if the meter still counts, call a licensed electrician.

Prices shown are regular prices on Buy More Mall. Many products are currently on offer, so open the product page to see today's price.

Related Guides

• Solar Panel Price in Kenya
• Instant Shower Installation
• Sockets, Switches and Bulbs