How to Install an Instant Shower Safely in Kenya (2026)

Oct 11, 2026
Buy More Mall Kenya
How to Install an Instant Shower Safely in Kenya (2026)

An instant shower heats water as it flows, drawing a large current right next to water. Installed correctly it is safe and cheap; installed badly it is dangerous.

Quick answer: Give the shower its own circuit from the consumer unit with a correctly sized cable (usually 4–6 mm²) and breaker, a proper earth and RCD protection. Fix it to the wall away from direct spray, connect a steady water supply, and fill it with water before switching on. Instant showers start from KSh 2,200 on Buy More Mall.

Safety first: electrical work must be done by a qualified, licensed electrician. Switch off at the main switch before touching any wiring.

Electrical Requirements

ItemRequirement
CircuitDedicated, not shared with sockets
CableSized to the shower rating (often 4–6 mm²)
BreakerMatches cable and shower rating
EarthConnected to the shower earth terminal
RCDRequired for shock protection
IsolatorDouble-pole switch outside the spray zone

Installation Steps

  1. Choose a position with the supply pipe below and away from direct spray.
  2. Run the dedicated cable from the consumer unit through an isolator switch.
  3. Mount the unit level with the screws provided.
  4. Connect the water inlet with a valve; flush the pipe first to clear grit.
  5. Connect live, neutral and earth tightly.
  6. Open the water and let it run through the cold setting to fill the heater.
  7. Switch on and test the temperature settings.
  8. Test the RCD with its test button.

Showers and Fittings

Some photos are reference images of the product type, used under open licences. Image credits are on each product page.

ItemUsePrice
4T Enershower Instant ShowerInstant showerKSh 2,200
Instant Shower (Ducha)Instant showerKSh 2,500
PPR PPR Shower Head SmallStandard shower headKSh 360
PPR PPR Shower Head BigLarge shower headKSh 450
Consumer Units 4 Way (Scanford)Board for a new circuitKSh 2,000

Compare models: instant shower prices. Cable sizes: cable size guide.

Instant Shower Not Heating?

ProblemLikely cause
Runs coldFlow too high, or element burnt out
Turns off and onLow water pressure trips the flow switch
Breaker tripsUndersized cable/breaker or earth fault
Weak flowBlocked head or low tank height

Low flow? See how to increase water pressure.

Worked Example

A bedsitter owner fits an instant shower at KSh 2,200. The electrician runs a new circuit with its own breaker and isolator from the existing board. The roof tank is only 2 m above the shower, so the shower cycles off and on. A small booster pump or raising the tank fixes it.

Common Mistakes to Avoid

  • Plugging the shower into a socket.
  • No earth connection.
  • Switching on before water fills the unit (burns the element).
  • Mounting it where spray hits the cover directly.
  • Using thin cable.

Not sure which one fits? Send us your details on WhatsApp or through the product page and we will help you choose.

Frequently Asked Questions

How do I install an instant shower?

On its own circuit with correct cable, breaker, earth and RCD, a steady water supply, and fill with water before switching on.

What cable size is used for an instant shower?

Usually 4–6 mm², sized to the shower rating by an electrician.

Why is my instant shower not heating?

Flow is too high, pressure is too low, or the element has failed.

Is an instant shower safe?

Yes, when properly earthed and RCD-protected on its own circuit.

How much is an instant shower in Kenya?

Instant showers start from KSh 2,200 on Buy More Mall.

Do instant showers use a lot of electricity?

They draw high power while running, so shorter showers save tokens.

Prices shown are regular prices on Buy More Mall. Many products are currently on offer, so open the product page to see today's price.

Related Guides

All Categories
Flash Sale
Todays Deal
Auction